Pitting corrosion performance of plasma oxidized Cp-Ti and effects of fabrication methods

In this study, the electrochemical corrosion properties of commercial pure titanium (Cp-Ti) samples produced by additive manufacturing and forging were compared by plasma oxidizing. Plasma oxidizing processes were carried out at temperatures of 650 °C and 750 °C for 1 h and 4 h. Electrochemical corrosion experiments were carried out in Simulated Body Fluid (SBF) using open circuit potential, cyclic potentiodynamic polarization and electrochemical impedance spectroscopy methods. It was found that the coating thickness of F 750 °C-4 h and S 750 °C-4 h samples was the highest. The corrosion resistance of the samples produced by additive manufacturing is lower than that produced by forging due to the Lack of fusion (LOF) effect. The barrier layer developed by the plasma oxidizing process significantly improved the corrosion performance of additive manufacturing by reducing the LOF effect. The minimum corrosion rate was obtained at S 750°-4 h. While the total material loss due to corrosion was the lowest on this surface, the last corroded surface was F 750°-4 h. The maximum resistance was observed on the plasma oxidized surfaces for the group produced by forging.