Effect of different surface roughening treatment on polyether ether ketone and acrylic resin bonding: A pilot study.

Background. As polyether ether ketone (PEEK) is a relatively new material in dentistry, its bonding properties with regard to dental acrylic base materials are not fully known. To ensure the long-term success of removable dentures with a PEEK framework, the base materials must be well bonded to each other. Objectives. The study aimed to investigate the effects of different kinds of surface roughening treatment on PEEK and acrylic resin bonding. Material and methods. Eighty PEEK specimens ( N = 80) were randomly divided into 5 groups ( n = 16 per group) and subjected to various surface roughening treatment (control, grinding, sandblasting, tribochemical silica coating (CoJet), and sulfuric acid etching). Heat -polymerized acrylic resin was applied to the treated surfaces of the PEEK specimens. The shear bond strength (SBS) test, environmental scanning electron microscopy (ESEM) analysis and three-dimensional (3D) surface topography analysis were performed. The statistical analysis of the data was conducted using the analysis of variance (ANOVA) and Tukey's multiple comparison test. Results. The one-way ANOVA showed significant differences in the SBS values between the groups ( p = 0.001). Sandblasting, tribochemical silica coating and sulfuric acid etching resulted in high SBS values ( p = 0.001). The highest SBS values were observed in the sulfuric acid etching group (8.83 +/- 3.63 MPa), while the lowest SBS values were observed in the control group (3.33 +/- 2.50 MPa). Conclusions. The additional roughening treatment applied to the PEEK surface increases the bond strength with heat -polymerized acrylic resin.