MATERIALS TODAY COMMUNICATIONS
19 publications · 327 citations
Publications
| Title | Year | Author | Citations |
|---|---|---|---|
|
A review of pretreatment techniques for electroless nickel-phosphorus plating on magnesium alloys with enhanced corrosion resistance and mechanical properties
|
2025 | Seifzadeh, D., Rajabalizadeh, Z., Dikici, B. +2 | 10 |
|
Effects of processing parameters on the tribocorrosion behaviour of AISI 316L fabricated by laser powder bed fusion (L-PBF)
|
2025 | Bozkurt, Yusuf Burak | 3 |
|
Systematic characterization and enhanced corrosion resistance of novel β-type Ti-30Zr-5Mo biomedical alloys with halloysite nanotubes (HNTs) and zirconia (ZrO<sub>2</sub>)-reinforced polylactic acid (PLA) matrix coatings
|
2024 | Topuz, M., Dikici, B., Kasapoglu, A. E. +2 | 12 |
|
Enhancing high cycle fatigue performance of plasma nitrided AISI 4140 steel by post-aging treatment and direct current magnetic field
|
2024 | Yetim, A. F., Kovaci, H., Tekdir, H. +3 | 8 |
|
Application of natural fibres in cement concrete: A critical review
|
2023 | Hamada, Hussein M., Shi, Jinyan, Jawahery, Mohammed S. Al +3 | 84 |
|
Corrosion response and biocompatibility of graphene oxide (GO)- serotonin (Ser) coatings on Ti6Al7Nb and Ti29Nb13Ta4.6Zr (TNTZ) alloys fabricated (EPD)
|
2023 | Oktay, Aysel, Yilmazer, Hakan, Przekora, Agata +4 | 16 |
|
The effect of animal and synthetic fibers on the physico-mechanical durability and microstructure properties of natural hydraulic lime-based mortars
|
2023 | Demircan, Ruya Kilic, Tayeh, Bassam A., Celik, Damla Nur +2 | 11 |
|
Combined effects of magnetic field and surface treatments consisting of shot peening, plasma nitriding and their consecutive application on the friction and wear behavior of a ferromagnetic steel
|
2023 | Celik, H., Kovaci, H. | 9 |
|
Synthesis, characterization and tribological properties of solid lubricant graphite films produced by PECVD
|
2023 | Celik, A., Ozer, H. O., Tuezemen, S. . M. +2 | 8 |
|
Characterization and performance of Tantalum-Tungsten based coatings deposited on Cp-Ti substrates by PVD technique
|
2023 | Senocak, Taha Cagri | 7 |
|
Optimization of without SCM concrete exposed to seawater according to minimum cost and CO<sub>2</sub> emissions: Sustainable design with ABC algorithm
|
2023 | Kaplan, Gokhan, Bayraktar, Oguzhan Yavuz, Bayraktar, Tugrul | 5 |
|
Comparison of the structural properties, surface wettability and corrosion resistance of TiO2 nanotubes fabricated on Cp-Ti, Ti6Al4V and Ti45Nb
|
2022 | Acar, M. T., Kovaci, H., Celik, A. | 20 |
|
Microstructure evolution and wear properties of ECAP-treated Al-Zn-Mg alloy: Effect of route, temperature and number of passes
|
2022 | Yilmaz, Taha Alper, Totik, Yasar, Senoz, Guzide Meltem Lule +1 | 14 |
|
Investigation of corrosion and tribocorrosion behavior of boron doped and graphene oxide doped TiO 2 nanotubes produced on Cp-Ti
|
2022 | Acar, M. T., Kovaci, H., Celik, A. | 13 |
|
Influence of sodium pentaborate (B<sub>5</sub>H<sub>10</sub>NaO<sub>13</sub>) additive in plasma electrolytic oxidation process on WE43 magnesium alloys
|
2022 | Senocak, Taha Cagri, Yilmaz, Taha Alper, Budak, Hasan Feyzi +4 | 10 |
|
Improving the wettability and corrosion behavior of Cp-Ti by applying anodization surface treatment with the addition of boric acid, graphene oxide and hydroxyapatite
|
2022 | Acar, M. T., Kovaci, H., Celik, A. | 9 |
|
The antibacterial properties and corrosion behavior of silver-doped niobium oxynitride coatings
|
2022 | Senocak, Taha Cagri, Ezirmik, Kadri Vefa, Cengiz, Seyda | 7 |
|
Determination of mechanical properties of polymer matrix composites reinforced with electrospinning N66, PAN, PVA and PVC nanofibers: A comparative study
|
2021 | Uslu, Emin, Gavgali, Mehmet, Erdal, Mehmet Okan +2 | 62 |
|
Processing of Ti/(HA+ZrO<sub>2</sub>) biocomposite and 50% porous hybrid scaffolds with low Young's modulus by powder metallurgy: Comparing of structural, mechanical, and corrosion properties
|
2021 | Topuz, Mehmet, Dikici, Burak, Gavgali, Mehmet +1 | 19 |