CONSTRUCTION AND BUILDING MATERIALS

Development of high-performance one-part geopolymer foam concrete using ground granulated blast furnace slag, waste concrete sludge, and bamboo powder for sustainable construction

Synergistic role of nano-Fe₂O₃ and activator chemistry in enhancing mechanical, durability, and microstructural properties of fly ash-waste marble powder geopolymers

Hybrid alkali-activated slag composites incorporating porcelain polishing residue and marble waste with basalt fiber: Mechanical, durability, and microstructural performance

Nano-clay and basalt fiber reinforcement of fly ash-expanded perlite lightweight geopolymers: Effects on mechanical, thermal, and durability properties

Sustainable alkali-activated foam concrete with pumice aggregate: Effects of clinoptilolite zeolite and fly ash on strength, durability, and thermal performance

Sustainable geopolymer foam concrete with recycled crumb rubber and dual fiber reinforcement of polypropylene and glass fibers: A comprehensive study

Integration of reclaimed asphalt aggregates into glass fiber-reinforced alkali-activated composites: Mechanical performance and durability

A green approach to construction: Fly ash-based one-part geopolymer foam concrete reinforced with waste concrete powder and polypropylene fibers

Enhancing thermal insulation, mechanical strength, and durability of one-part fly ash-based geopolymer foam concrete using lime and mahogany sawdust

Investigation of physical, mechanical and thermal properties of hemp and camelina reinforced polymer composites

Innovative solutions on ductility and bearing capacity: Strengthening flexural performance of reinforced concrete beams with recycled face mask fibers

Sustainable lightweight wall blocks from recycled construction waste: The role of diatomite in mechanical ecological and thermal optimization

Towards sustainable geopolymers: Utilization of diverse calcined clays as alternative precursors

Mechanical, microstructural, and environmental performance of alkali-activated slag mortar with metakaolin and glass fiber

Engineering properties of hybrid foam concrete based on waste glass powder and red pine cone powder

Comprehensive evaluation of fresh, mechanical, durability, and thermal properties of one-part alkali-activated slag composites with hybrid fibers and activated carbon

Chemical resistance and toughness of fiber-reinforced ferrocement composites in H₂SO₄ and Na₂SO₄ environments: Enhancing the flexibility of structural foam concrete

Performance assessment and cost analysis of slag/metakaolin based rubberized semi-lightweight geopolymers with perlite aggregate: Sustainable reuse of waste tires

Sustainable foam concrete development: Enhancing durability and performance through pine cone powder and fly ash incorporation in alkali-activated geopolymers

Investigation on the sustainable use of different sizes of sawdust aggregates in eco-friendly foam concretes: Physico-mechanical, thermal insulation and durability characteristics

Impact of rice husk ash on physico-mechanical, durability and microstructural features of rubberized lightweight geopolymer composite

Mechanical and durability properties of polymer fiber reinforced one-part foam geopolymer concrete: A sustainable strategy for the recycling of waste steel slag aggregate and fly ash

Effective utilization of silica fume and waste colemanite in eco-sustainable prepacked geopolymers

Experimental investigation on mechanical properties of sustainable roller compacted concrete pavement (RCCP) containing waste rubbers as alternative aggregates

Effect of hybrid fibers and high temperatures on the properties of geopolymer composites based on slag, metakaolin, and natural zeolite

Performance assessment of fiber-reinforced coral aggregate-based lightweight foam concrete for sustainable marine construction

Synergetic effect of fibers on geopolymers: Cost-effective and sustainable perspective

Experimental study of bond behavior of geopolymer concrete under different curing condition using a pull-out test

Mechanical, durability, and microstructure of soft clay stabilised with anionic biopolymer

Effect of quaternary binder slag-based geopolymer slurries on mechanical durability and microstructural properties of green prepacked composites

The confinement effect of basalt fibers for reinforced geopolymer composites: Flexural, shear and torsion capability for ductility and failure

Impact of hybrid and non-hybrid Fiber Reinforced Polymers on mechanical performance of concrete

Enhancing foam concrete: A comparative analysis of PLA plus fiber reinforcements with plain, hooked, and corrugated fibers

The effect of steel fiber aspect-ratio and content on the fresh, flexural, and mechanical performance of concrete made with recycled fine aggregate

Physico-mechanical, thermal insulation and resistance characteristics of diatomite and attapulgite based geopolymer foam concrete: Effect of different curing regimes

Hemp fiber reinforced one-part alkali-activated composites with expanded perlite: Mechanical properties, microstructure analysis and high-temperature resistance

Investigation of mechanical and thermal properties of new type bio-composites containing camelina

Mechanical, durability and microstructural characteristics of Portland pozzolan cement (PPC) produced with high volume pumice: Green, cleaner and sustainable cement development

Effect of waste colemanite and PVA fibers on GBFS-Metakaolin based high early strength geopolymer composites (HESGC): Mechanical, microstructure and carbon footprint characteristics

Effect of aluminosilicate precursors and curing regime on physico-mechanical durability and microstructural characteristics of coral geopolymers (Cor-Geo): Cleaner production for coral islands

Characterization study of geopolymer concretes fabricated with clinker aggregates

Activity concentration and annual effective dose assessments of radon in SCCs with different mineral additives

Basalt fiber-reinforced foam concrete containing silica fume: An experimental study

Lightweight foam concrete containing expanded perlite and glass sand: Physico-mechanical, durability, and insulation properties

Optimization of foam concrete characteristics using response surface methodology and artificial neural networks

Effect of quartz powder on mid-strength fly ash geopolymers at short curing time and low curing temperature

The influence of nano-CaO and nano-Al₂O₃ and curing conditions on perlite based geopolymer concrete produced by the one-part mixing method

The radiation shielding and microstructure properties of quartzic and metakaolin based geopolymer concrete

Synergic effect of fly ash and calcium aluminate cement on the properties of pumice-based geopolymer mortar

The use of waste marble for cleaner production of structural concrete: A comprehensive experimental study

Usage of ready-mixed concrete plant wastewater in concrete with superplasticizer: Effect on physico-mechanical properties

The effect of vehicle waste tires on the mechanical, hardness and stress-strain properties of polyester-based polymer concretes

Mechanical durability and microstructural properties of sustainable high strength mortars ?ncorporated basalt fiber and copper slag: Taguchi optimization

Physico-mechanical, durability and thermal properties of basalt fiber reinforced foamed concrete containing waste marble powder and slag

Effect of waste marble powder and rice husk ash on the microstructural, physico-mechanical and transport properties of foam concretes exposed to high temperatures and freeze-thaw cycles

Characteristics of hemp fibre reinforced foam concretes with fly ash and Taguchi optimization

Influence of bottom ash and polypropylene fibers on the physico-mechanical, durability and thermal performance of foam concrete: An experimental investigation

Effect of cement dosage and waste tire rubber on the mechanical, transport and abrasion characteristics of foam concretes subjected to H₂SO₄ and freeze-thaw

The impact of RCA and fly ash on the mechanical and durability properties of polypropylene fibre-reinforced concrete exposed to freeze-thaw cycles and MgSO4 with ANN modeling

The impact of natural and calcined zeolites on the mechanical and durability characteristics of glass fiber reinforced cement composites

Effect of high volume fly ash and micro-steel fiber on flexural toughness and durability properties in self-compacting lightweight mortar (SCLM)

Influence of singular and binary nanomaterials on the physical, mechanical and durability properties of mortars subjected to elevated temperatures and freeze-thaw cycles

The effect of trio-fiber reinforcement on the properties of self-compacting fly ash concrete