Article 2025 · 12 atıf

Enhancing corrosion resistance and radiation shielding of AISI 304 SS with Nb and Mo-added Al<sub>0.3</sub>CrFeCoNi-based high-entropy alloy coatings in 3.5 wt% NaCl: The effect of environmental temperature

Dikici, Burak, Lindner, Thomas, Sakar, Erdem, Lampke, Thomas, Seifzadeh, Davod, Grund, Thomas, Kamaci, Kubra

Özet

In this study, the corrosion behavior and radiation shielding capacity of Al0.3CrFeCoNi-based high-entropy alloy coatings (HEACs) produced by high-speed laser metal deposition (HS-LMD) were investigated. The addition of Nb and Mo elements in critical ratios was also evaluated under 3.5 wt% NaCl conditions to assess their potential in nuclear applications. Electrochemical corrosion tests were conducted using potentiodynamic scanning (PDS) and electrochemical impedance spectroscopy (EIS) at 25, 50, and 75 degrees C. The phase structure of the coatings was characterized using X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Microstructural observations before and after the corrosion tests were performed with scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). The radiation shielding capacities of the coatings were assessed by comparing linear attenuation coefficient (LAC), half-value layer (HVL), and mean free path (MFP) values. The results revealed that adding Nb and Mo maintains the FCC phase structure after the cladding process. Corrosion tests indicated that the Mo-containing coating had the lowest corrosion rate of 0.59 mu m center dot year(-1) at 25 degrees C, while the highest rate of 13.31 mu m center dot year(-1) was observed in the Nb-containing coating at 75 degrees C. Furthermore, the Mocontaining coating demonstrated superior corrosion resistance, supported by EIS and XPS analyses that highlight the role of MoO3 and MoO2 in enhancing passivation stability. Radiation shielding evaluations show that the Al0.3CrFeCoNiMo0.75 structure has the highest LAC of 4.828 cm(-1), attributed to density and atomic number of Mo, while the MFP value decreased to 0.207 cm, indicating enhanced photon attenuation. These results emphasize the potential of Al0.3CrFeCoNi-based HEACs as effective materials in radiation and corrosion-heavy environments.

Anahtar Kelimeler

High-entropy alloy coatings Al0.3CrFeCoNi Laser cladding Corrosion Radiation shielding Phy-X/PSD STAINLESS-STEELS BEHAVIOR MICROSTRUCTURE TRENDS FILMS

WoS Kategorileri

Chemistry, Physical Materials Science, Multidisciplinary Metallurgy & Metallurgical Engineering

Künye

Dergi: JOURNAL OF ALLOYS AND COMPOUNDS
Yıl: 2025
Cilt: 1020
ISSN: 0925-8388
eISSN: 1873-4669
DOI: 10.1016/j.jallcom.2025.179432
WoS UID: WOS:001439444300001

Yayını aç (DOI)