REMOVAL OF COPPER FROM AQUEOUS SOLUTIONS BY ADSORPTION ON MAHOGANY TREE SAWDUST (<i>Swietenia mahagoni</i>) IN BATCH AND FIXED BED

Copper poses a major health risk when present in excessive amounts in drinking water and daily feeding. Mahogany chips were used in the batch and fixed bed reactors to study the removal of copper from synthetically prepared solutions. The experimental parameters were the initial solution pH, adsorbent dose, temperature, concentration, duration, volumetric flow rate and bed heights. It was found that pH (5), adsorbent dose (10 g/L), time (60 min) and temperature (250 degrees C) were the best conditions for the batch reactor. A volume flow of 0.5 mL/min, a bed height (15 cm) and a concentration (50 mg/L) were determined as fixed bed parameters for maximum removal, since the breakthrough time increased with these settings. The results can be explained by the pseudo-second-order kinetic model used to study the kinetics of the batch reactor using the pseudo-first-order and pseudo-second-order models. The Yoon-Nelson and Thomas models received the fixed bed reactor kinetic data and the column reactor data were fitted to both models. Activation energy was calculated to be 40.747 kJ/mol at 75 mg/L initial concentration. As a result of experiments with pH: 5, 10 g/L adsorbent dosage for batch studies and 60 minutes for 25 degrees C temperature, a copper removal of 65.7% was obtained using mahogany chips under optimal conditions. It was concluded that the mahogany tree shavings were a suitable biosorbent forcopper removal from wastewaters.

Dergi

ENVIRONMENTAL ENGINEERING AND MANAGEMENT JOURNAL

Yıl

2024

Cilt

23

Sayı

1

ISSN

1582-9596

eISSN

1843-3707

DOI

10.30638/eemj.2024.001

WoS UID

WOS:001235350200003