Effect of milling time on microstructure and hardness of AA7075-15 wt% SiC-1 wt% MWCNT nanocomposite

In this study, the effect of ball milling on microstructure and hardness of Al7075 - 15 wt% SiC - 1 wt% MWCNT nanocomposite was investigated as a function of milling time up to 20 h. Mechanically alloyed powders were consolidated by cold pressing followed by sintering at 560 degrees C for 1 h in an argon atmosphere. The structural characterization of nanocomposites was conducted by a X-ray diffractometer (XRD), optical microscopy (OM), scanning electron microscopy (SEM), and grain size analyses. The hardness of samples was measured by using Wolpert Wilson-400 micro-hardness testing equipment comprising of a Vickers indenter. The structural defects of pristine and milled MWCNTs were calculated by using defect and carbon intensity ratio (ID/IG) resulted from Raman spectroscopy. The results indicate that after ball milling, the grain size decreases depending on the milling time, the intermetallic Al4C3 phase is formed as a result of the reaction between the matrix and the MWCNT particles, and the MWCNT structure is destroyed. The finest grain size and highest hardness values were obtained as 483 nm and 134 HV, respectively, after 15 h of grinding.

Dergi

JOURNAL OF COMPOSITE MATERIALS

Yıl

2024

Cilt

58

Sayı

5

Sayfa

619-628

ISSN

0021-9983

eISSN

1530-793X

DOI

10.1177/00219983241227393

WoS UID

WOS:001145717200001