Kaplan, Gokhan

Indigo Beyond Tradition: Scalable Derivatization, Extraction from Waste Denim Textiles, and Boc-Protected Intermediates

Development of high-performance one-part geopolymer foam concrete using ground granulated blast furnace slag, waste concrete sludge, and bamboo powder for sustainable construction

Fly ash and waste brick powder-based one-part geopolymer foam concrete with enhanced thermal performance: A circular approach to construction and demolition waste utilization

From geological waste to sustainable infrastructure: Multi-Criteria analysis of granite powder in fiber-reinforced cementitious composites

Strengthening of damaged RC beams using geopolymer concrete layers: Experimental and analytical insights

Copper tailings recycling in cement-based composites: A deterministic LCA approach accompanied by microstructure, mechanical, thermal and non-destructive tests

Sustainable fly ash-based geopolymer composites: The influence of RAP aggregates and silica fume on strength, durability, and microstructural properties

Microstructure properties and life cycle analysis (LCA) of zeolite-containing foam composites produced under different curing conditions

Eco-efficient lime/pumice mortars with sheep wool for heritage restoration: Life cycle and energy savings (vol 215, 115624, 2025)

Enhancing durability of slag-based alkali-activated composites with dunite sand and carbon fiber: Sulfate, freeze-thaw, and thermal resistance optimization

Hybrid alkali-activated slag composites incorporating porcelain polishing residue and marble waste with basalt fiber: Mechanical, durability, and microstructural performance

Nano-clay and basalt fiber reinforcement of fly ash-expanded perlite lightweight geopolymers: Effects on mechanical, thermal, and durability properties

Sustainable Foam Concrete with Ceramic Powder and Coconut Shell Aggregate: Enhancing Environmental Sustainability and Material Performance

Alternatives to mitigate the inferior performance of wet-mix shotcrete containing high recycled fine aggregate replacement rates

Synergistic role of nano-Fe₂O₃ and activator chemistry in enhancing mechanical, durability, and microstructural properties of fly ash-waste marble powder geopolymers

Enhanced durability, performance, and sustainability of alkali-activated composites with nano-Fe₂O₃ and nano-Fe₃O₄ under hybrid thermal-microwave curing

Enhanced mechanical and durability properties of alkali-activated composites through the use waste tire aggregates, brick powder, and marble powder

Integration of reclaimed asphalt aggregates into glass fiber-reinforced alkali-activated composites: Mechanical performance and durability

Feasibility of foam concrete using recycled brick and roof tile fine aggregates

Physio-mechanical, durability and microstructural properties of sustainable permeable concrete reinforced with basalt fiber: reuse and recycling of waste polypropylene

Mechanical, microstructural, and environmental performance of alkali-activated slag mortar with metakaolin and glass fiber

The mechanical and thermal behavior of eggshell-pumice powder-based geopolymer foam concrete

Enhancing freeze-thaw and sulfate resistance of expanded perlite-based alkali-activated lightweight composites with waste tire aggregates and brick powder

Development of Lightweight Building Materials Using a Sustainable Chemistry Approach: The Multifunctional Effects of Garlic Husk Ash on Foam Concrete

Synergistic enhancement of mechanical, thermal, and durability properties in expanded perlite-based lightweight alkali-activated composites with basalt fiber and natural zeolite

Engineering properties of hybrid foam concrete based on waste glass powder and red pine cone powder

Synergistic effects of boiler ash and polypropylene fibers on the mechanical and durability properties of fly ash-based geopolymer foam concrete

Effects of air encapsulated with waste plastic straws in cement matrix on thermal insulation performance: sustainable and energy-efficient foam concrete production

Comprehensive evaluation of fresh, mechanical, durability, and thermal properties of one-part alkali-activated slag composites with hybrid fibers and activated carbon

Eco-efficient roller-compacted concrete with recycled aggregates and fiber reinforcement

Recycling concrete sludge waste as a supplementary binder in one-part alkali-activated composites: A comprehensive performance evaluation

Green prepacked foam concretes against environmental attacks: The role of waste aluminum shavings, cooling methods and binder modifications

A green approach to construction: Fly ash-based one-part geopolymer foam concrete reinforced with waste concrete powder and polypropylene fibers

Sustainable prepacked alkali-activated concrete: influence of natural zeolite, recycled aggregate, and curing conditions on mechanical, durability, and thermal performance

Enhancing thermal insulation, mechanical strength, and durability of one-part fly ash-based geopolymer foam concrete using lime and mahogany sawdust

Optimization of sustainable high-performance alkali-activated composites using industrial and agricultural wastes: A comprehensive performance evaluation

Use of waste latex paints in adhesive mortars for ceramic tile applications

Sustainable enhancement of alkali-activated foam concrete using vegetable waste ash and fly ash: Improving mechanical, thermal, and durability properties

Artificial intelligence-driven models for predicting mechanical properties of low-emission microwave-cured geopolymer mortar

Properties of green prepacked composites produced with slag cement: efficient recycling of micronized waste marble powder and waste wood sawdust

Chemical resistance and toughness of fiber-reinforced ferrocement composites in H₂SO₄ and Na₂SO₄ environments: Enhancing the flexibility of structural foam concrete

Characterizing the Chemistry of One-Part Green Geopolymer Foams: The Role of Silica Fume and Fiber Hybridization

Sustainable geopolymer foam concrete with recycled crumb rubber and dual fiber reinforcement of polypropylene and glass fibers: A comprehensive study

Sustainable lightweight wall blocks from recycled construction waste: The role of diatomite in mechanical ecological and thermal optimization

Effect of apricot kernel ash on the performance of sustainable alkali-activated composites

Dunite powder as a green precursor in one-part alkali-activated composites: Effects on mechanical and durability properties

Sustainable alkali-activated foam concrete with pumice aggregate: Effects of clinoptilolite zeolite and fly ash on strength, durability, and thermal performance

Effects of metakaolin and waste tire aggregate on the properties of pumice-based lightweight geopolymer

Impact of attapulgite and basalt fiber additions on the performance of pumice-based foam concrete: mechanical, thermal, and durability properties

Innovative solutions on ductility and bearing capacity: Strengthening flexural performance of reinforced concrete beams with recycled face mask fibers

Recycling aerated concrete waste as aggregate to produce eco-friendly foamed mortar (EFM)

D- π-A azo dyes bearing thiazole-diphenylamine units: Synthesis, photophysical and molecular structure properties, and use for dyeing of polyester fabrics

Performance assessment and cost analysis of slag/metakaolin based rubberized semi-lightweight geopolymers with perlite aggregate: Sustainable reuse of waste tires

Physical, mechanical and microstructural properties of one-part semi-lightweight geopolymers based on metakaolin modified with gypsum and lime

Assessment of the sustainability and producibility of adobe constructions reinforced with Ca-based binders: Environmental life cycle analysis (LCA) and 3D printability

Sustainable foam concrete development: Enhancing durability and performance through pine cone powder and fly ash incorporation in alkali-activated geopolymers

Sustainable use of waste marble powder and reclaimed asphalt pavement as aggregates in slag/metakaolin-based self-compacting geopolymer composites: Properties and durability

Effective utilization of silica fume and waste colemanite in eco-sustainable prepacked geopolymers

Sustainable Use of Waste Tire Rubbers in Eco-Friendly and Lightweight Alkali-Activated Slag-Silica Fume Mortars

Effect of hybrid fibers and high temperatures on the properties of geopolymer composites based on slag, metakaolin, and natural zeolite

Studying the metakaolin content, fiber type, and high-temperature effects on the physico-mechanical properties of fly ash-based geopolymer composites

Effect of quaternary binder slag-based geopolymer slurries on mechanical durability and microstructural properties of green prepacked composites

Performance assessment of fiber-reinforced coral aggregate-based lightweight foam concrete for sustainable marine construction

Sustainable use of recycled fine aggregates in steel fiber-reinforced concrete: Fresh, flexural, mechanical and durability characteristics

Mechanical and durability properties of polymer fiber reinforced one-part foam geopolymer concrete: A sustainable strategy for the recycling of waste steel slag aggregate and fly ash

Enhancing foam concrete: A comparative analysis of PLA plus fiber reinforcements with plain, hooked, and corrugated fibers

Utilizing genetic programming to evaluate and predict roller-compacted concrete pavements reinforced with coal powder and basalt fiber

Effect of Na₂SiO₃/NaOH rate and natural zeolite content on basalt fiber reinforced eco-efficient slag-based geopolymer mortar synthesis

A study on sustainable foam concrete with waste polyester and ceramic powder: Properties and durability

Engineering and microstructural properties of environmentally friendly alkali-activated composites containing clinker aggregate: heat-curing regime and elevated-temperature effect

Experimental study of bond behavior of geopolymer concrete under different curing condition using a pull-out test

Investigation on the sustainable use of different sizes of sawdust aggregates in eco-friendly foam concretes: Physico-mechanical, thermal insulation and durability characteristics

Fracture performance of fiber reinforced geopolymer: Synergetic perspective

Effects of silica fume and rice husk ash contents on engineering properties and high-temperature resistance of slag-based prepacked geopolymers

Recycling of waste crushed stone powder for alkali-activated material production

Durability of green rubberized 3D printed lightweight cement composites reinforced with micro attapulgite and micro steel fibers: Printability and environmental perspective

Impact of rice husk ash on physico-mechanical, durability and microstructural features of rubberized lightweight geopolymer composite

Sustainable use of silica fume and metakaolin in slag/fly ash-based self-compacting geopolymer composites: Fresh, physico-mechanical and durability properties

Synergetic effect of fibers on geopolymers: Cost-effective and sustainable perspective

Hemp fiber reinforced one-part alkali-activated composites with expanded perlite: Mechanical properties, microstructure analysis and high-temperature resistance

Insulating and fire-resistant performance of slag and brick powder based one-part alkali-activated lightweight mortars

Basalt fiber reinforced foam concrete with marble waste and calcium aluminate cement

Effect of aluminosilicate precursors and curing regime on physico-mechanical durability and microstructural characteristics of coral geopolymers (Cor-Geo): Cleaner production for coral islands

Valorization of Seawater as an Activator for Mixing and Curing Water in Mid-Strength Concrete Containing Class C Fly Ash: Strength, Economic and Environmental Benefits

Effect of using wastewater from the ready-mixed concrete plant on the performance of one-part alkali-activated GBFS/FA composites: Fresh, mechanical and durability properties

Physico-mechanical and microstructural properties of waste geopolymer powder and lime-added semi-lightweight geopolymer concrete: Efficient machine learning models

Recycling of waste marble powder and waste colemanite in ternary-blended green geopolymer composites: Mechanical, durability and microstructural properties

Improving the eco-efficiency of fiber reinforced composite by ultra-low cement content/high FA-GBFS addition for structural applications: Minimization of cost, CO2 emissions and embodied energy

The effect of clinker aggregate on acid resistance in prepacked geopolymers containing metakaolin and quartz powder in the presence of ground blast furnace slag

Effect of cement clinker type, curing regime and activator dosage on the performance of one-part alkali-activated hybrid slag/clinker composites

Application of natural fibres in cement concrete: A critical review

The plastic hinge length prediction of RC members by using ANN

The effect of animal and synthetic fibers on the physico-mechanical durability and microstructure properties of natural hydraulic lime-based mortars

Physico-mechanical and shielding properties of alkali-activated slag composites incorporating cement clinker aggregate: Effect of high temperature and particle size

Optimization of without SCM concrete exposed to seawater according to minimum cost and CO₂ emissions: Sustainable design with ABC algorithm

The effect of geopolymer slurries with clinker aggregates and marble waste powder on embodied energy and high-temperature resistance in prepacked concrete: ANFIS-based prediction model

Performance evaluation and cost analysis of prepacked geopolymers containing waste marble powder under different curing temperatures for sustainable built environment

Metakaolin-based geopolymer concretes for nuclear protection: On the perspective of physicochemical, durability, and microstructure

The Mechanical and Fracture Characteristics of Low Fiber Content Slurry-Infiltrated Fiber Concrete

Characterization study of geopolymer concretes fabricated with clinker aggregates

Mechanical, durability and microstructural characteristics of Portland pozzolan cement (PPC) produced with high volume pumice: Green, cleaner and sustainable cement development

The engineering properties of high strength mortars incorporating juniper seed ash calcined at different temperatures: Comparison with other SCMs

Effect of waste colemanite and PVA fibers on GBFS-Metakaolin based high early strength geopolymer composites (HESGC): Mechanical, microstructure and carbon footprint characteristics

Preparation and characterization of a novel prepacked aggregate geopolymer: A feasibility study

Synergic effect of some waste pozzolans on the mechanical and shielding properties of geopolymer concretes

Physico-mechanical, thermal insulation and resistance characteristics of diatomite and attapulgite based geopolymer foam concrete: Effect of different curing regimes

A comprehensive characterization on geopolymer concretes with low content slag and quartz aggregates: the shielding features

The effect of steel fiber aspect-ratio and content on the fresh, flexural, and mechanical performance of concrete made with recycled fine aggregate

High temperature resistant restoration mortar with fly ash and GGBFS

Usage of recycled fine aggregates obtained from concretes with low w/c ratio in the production of masonry plaster and mortar

The use of waste marble for cleaner production of structural concrete: A comprehensive experimental study

Usage of ready-mixed concrete plant wastewater in concrete with superplasticizer: Effect on physico-mechanical properties

Characteristics, energy saving and carbon emission reduction potential of gypsum wallboard containing phase change material

Properties of eco-friendly foam concrete containing PCM impregnated rice husk ash for thermal management of buildings

Development, characterization, and performance analysis of shape-stabilized phase change material included-geopolymer for passive thermal management of buildings

The radiation shielding and microstructure properties of quartzic and metakaolin based geopolymer concrete

Foam Concrete Produced with Recycled Concrete Powder and Phase Change Materials

The effect of limestone and bottom ash sand with recycled fine aggregate in foam concrete

Mechanical durability and microstructural properties of sustainable high strength mortars ?ncorporated basalt fiber and copper slag: Taguchi optimization

Optimization of foam concrete characteristics using response surface methodology and artificial neural networks

Investigation of physico-mechanical, thermal properties and solar thermoregulation performance of shape-stable attapulgite based composite phase change material in foam concrete

Effect of quartz powder on mid-strength fly ash geopolymers at short curing time and low curing temperature

The effect of recycled fine aggregates treated as washed, less washed and unwashed on the mechanical and durability characteristics of concrete under MgSO₄ and freeze-thaw cycles

Basalt fiber-reinforced foam concrete containing silica fume: An experimental study

Lightweight foam concrete containing expanded perlite and glass sand: Physico-mechanical, durability, and insulation properties

The impact of RCA and fly ash on the mechanical and durability properties of polypropylene fibre-reinforced concrete exposed to freeze-thaw cycles and MgSO4 with ANN modeling

The impact of natural and calcined zeolites on the mechanical and durability characteristics of glass fiber reinforced cement composites

Influence of bottom ash and polypropylene fibers on the physico-mechanical, durability and thermal performance of foam concrete: An experimental investigation

Effect of high volume fly ash and micro-steel fiber on flexural toughness and durability properties in self-compacting lightweight mortar (SCLM)

The effects of cement type and expanded vermiculite powder on the thermo- mechanical characteristics and durability of lightweight mortars at high temperature and RSM modelling

Effect of cement dosage and waste tire rubber on the mechanical, transport and abrasion characteristics of foam concretes subjected to H₂SO₄ and freeze-thaw

Experimental Investigation of Thermal Performance of XPS Insulated Exterior Walls

Characteristics of hemp fibre reinforced foam concretes with fly ash and Taguchi optimization

Effect of waste marble powder and rice husk ash on the microstructural, physico-mechanical and transport properties of foam concretes exposed to high temperatures and freeze-thaw cycles

Microstructure and durability properties of lightweight and high-performance sustainable cement-based composites with rice husk ash

Mechanical and durability properties of steel fiber-reinforced concrete containing coarse recycled concrete aggregate

Physico-mechanical, durability and thermal properties of basalt fiber reinforced foamed concrete containing waste marble powder and slag

The impact of recycled coarse aggregates obtained from waste concretes on lightweight pervious concrete properties